65A Plasma Cutter, 220V with Digital Display and 2T/4T Functions

Requires a consistent and reliable source of air.

Have had it for several months. Use it weekly in the shop. Cut and fabricated all the components for my own dump trailer. Cuts half inch plates steel without issue. Love it...

Please find and deliver my package that I've paid for to me

Well it was supposedly delivered to me today but it wasn't. I have not received it. I've contacted the brand through their channels of contacting consumer services but have yet to hear back from anyone!

lisä kulutusosia mistä saanti / hinta

lisä suutimä ja kulutus osia tarvitais erikokoisia suutimia eripaksuisille materalle ? laita tietua [removed]

Good machine.

Very pleased. So far I've cut lots of 2 and 3mm steel plate, which it cuts extremely fast and clean. I've also cut 12mm plate with absolutely no issues. Overall I'm really pleased with it.

Showed up to wrong place and does not work

Showed up to the wrong place then did not work would like a replacement

Plasma LG 65 amps.

When its arrived it was evening and the voltage on the grid it was low and i set the amperage at 40 to cut something for doing a test. Next morning I do it another test the voltage on the grid it was a litle bit better so I cut with amperage set at 50. At 65 it is imposibile to cut becauee I think the grid 220 v has no power enough thats make me to belive the plasma cutter It has a true power.

Does not work like it should

Would not recommend buying will not cut good like the description says it wont cut thin metal it looks like a bad weld when trying to use it

Good for small jobs

It does fine with small cuts but if youre trying to make long cuts it tends to overheat and shut off. Ended up buying an Arc Captain Cut65MP and am so happy I did.

Ultra cheap machine that cuts

This is a decent little plasma for the price. I have used it a few times on some 1/8" SS & Aluminum. It will cut 1/4" carbon steel fairly well but, it's definitely not a heavy duty machine but, if you are just cutting thin metal it will get the job done. Not sure how well it will hold up over time.

Works

Came with everything it said, works as intended

Recommended

Very easy to use, excellent for the price. I recommend it

STOPPED WORKING AFTER 1ST TIME USING

WORKED FOR 170 FEET QUIT, CAN'T GET THEM TO WARRANTY IT.

The brand For Life

Love this unit! Easy full set up! Ive used it on 110v and 220v i would highly suggest for home users buy a 110v 30a to 220v Dryer plug adapter and extension cord.

Could use improvement

Received this unit today, set it up and tested it. Instructions beyond labeling of components are non existent. Troubleshooting is for a welder! After a couple of hours of screwing around, I found that 4 of the 5 tips I was shipped were defective and produced only a very weak spark. Luckily one tip worked so I could verify that the unit was operable. The electrodes also look very cheap, so I would recommend shopping for some higher quality consumables right away, and you'll have to Google the settings for air pressure, 2T vs 4T operation, current settings etc. The unit seems ok, but it's frustrating trying to troubleshoot multiple faulty components on a new unfamiliar item. Picture of my faulty parts below for reference.

Fabricatoe

I\n Love my V vor 605 AM plasma cutter. Got it, it was very well packaged and it was very nicely. Assembled, hooked it up to 220 V connected the airlines and gave her the full beans and was able to cut through 7 sixteenths. Steel like a knife through butter. So my settings were 65 amps and 76 lbs of air and i just let it do the work. On 1/4 and 1/8 steel it was nothing to it. I would highly recommend it. However just be careful with the whole torch the procylin is fragile i acidently dropped it and broke mine in two no big deal one zip tie later and i was back up and cutting I would totally post pics and vids but i cant seem to get the formatting correct . No biggie but it does not change the way i feel. I love this unit

PENNEY

I WOULD NOT BUY ANY THING WITH the brand ON IT. I PURCHASED A PLASMA TORCH. NOT PLEASED WITH UNIT -CAN NOT GET ANY HELP FROM the brand

Plazma

For cutting thin players it is good, but I needed plazma for 2mm metal cutting so it barely makes it.

Mr

Works very well for what I need cutting 1/4” I didn’t use the air line it came with I would recommend this product

Love it

Works very good actually what kind of cut quarter inch plate fairly decent definitely a great purchase

Better than expected.

It cares more about clean ground than anything ive seen, wants it clean and close. But it was very surprising, works very well for the price and we are happy, would buy another. Have only used it on 220v.

Pretty Good Plasma

Pretty good plasma cutter. Priced fairly. Only issue is that the brand does not sell or offer replacement nozzle tips and electrodes.

Rictek

I was a little worried about the consumables. But I was able to find them at harbor freight. It's a little slow on ¼" n up but works great on thinner material. For the price it was a good investment. Down the road I'd like to bump up to the 65amp n give this one to my dad. Thank you Rick

equipment king

i will be posting a you tube review later

Mechanic master

Hi At the verry first day had a broken ceramic part of the torch a und i must buy at Ebay ,because u dont have as spare parts to buy??? Machine working exellent.. Br

lil' machine with big power

Wow.....the value is incredible. this little sucker out-cuts my big machine. I am cutting 1/2 stainless 316 plate. The expendable tips and cups last surprisingly long.....I think the standoff drag cage helps. This machine is so small, light, portable, I take it inside my sculpture easily....yet it has the cutting power of my big machine twice as big and 3x heavier. Hard to believe I got it delivered for only $250 bucks, Viva the brand

Cutter

It is Awsome just use it and it worked great I’m extremely impressed and love all the fab tools have the welder cart and table

owner

Loved it! Easy to use. Gotta have enough air pressure.

M

Never used a plasma before but has done what I wanted it for, very pleased.

Unsure...

It is ok for really thin metal. The one that I received however has a defect. It turns off every 10 seconds or so.... Returning

Does not work don’t buy !!!!

Torch burnt up when I went to strike an arc and now it’s junk the money won’t hurt me but it still sucks . Tried a live chat they answered and never could get them back I’ll just use it for target practice I guess

President

I bought two of these to trim the scrap drops off of our laser machine. They both stopped working after about a month of use. JUNK! Don't waste your money.

Owner

I have not used it yet so I can not answer the last question however I will go out on a limb and say I am 100 percent that it will work as it should so looking forward to running it thank you for all you have done.

Thomas

Works great especially for the price must have a compressor that puts out at least 8.5 CFM didn't think it would be very good but it works amazing once you know how to adjust it properly

Not sure

Came with a dent in it even though packaging was not damaged. Wouldn’t maintain an arc. Maybe my inexperience or a compressor issue. Ended up using an angle grinder…

Worker

This item is very bad. It turns off every 3 seconds. Sadly I was not using it sooner, but will try to return it.

65a plasms

No complaints works as said very surprised at how well it proform even on just 110v have had it on 220v yet

Plasma cutter

Everything came as advertised. Looks like a nice machine quality is good. Could improve on some of the clamps and connections to have quick connection. Air hose connections have not used it yet so not gonna give it my full review yet until a later time after I use it, but so far so good. I put airline quick connect and disconnects on it for ease of use. As you can see in the rear of the machine could be a better type of hose or connection from going to the filter so it’s not getting kinked but overall impressed so far.

Shop

Don't cut like I thought it would it stop cutting in the middle of it. Will not run on 110 alone 220. This not a good buy need to do better

Jack of all trades, master of none

This machine has a very affordable price. I use it at home but I believe it would even work well for shops and many other people beyond the "home hobbiest." Solid build, easy to get to work right out of the box.

I love it

I'm very happy with this machine. Not only is it pretty to look at - especially the large display, but it cuts beautifully through all the metal I have tried so far. I should've bought it years ago so I wouldn't have had to use an angle grinder so much. The only thing I don't like are the hose clamps - they're lousy, proper clamps with a screw and square nut are way better.

Plasma cutter

The brand sent me two units, the first one was damaged on arrival, they asked me to turn it on, it turned on briefly then fried itself. Second unit arrived fine, but turned it on and Instantly fried the second the trigger on the torch was pulled.

Plasma cutter

I was hesitant on purchasing this cause of the price, having used bigger name brands I figured the price difference makes this unit not a good buy, finally purchased it and I use this for a lot of projectsc I’ve cut anything from 11 ga to 1/2” with it, no complaints for sure

Owner

Machine wouldn't turn on. Couldn't get any satisfaction from the brand. Will never shop there again

Works but not as good as expected

Burns tips easy, quite hard to make cuts with right speed and distance so that the tips don't burn and get ruined. Takes lots of practice to figure out how to get the guts look clean and good. Really hard to find information about the air pressure and compressor requirements. Plastic air hoses are really hard to get sealed. ground wire clips is cheap, flimsy and the wire will break loose.

cool tool

easy to use, plug and just work - it's cuts for me 11mm metal, fast delivery see my unbox video.. https://youtu.be/cRi25bSx2ek

Precise and Efficient

The torch is easy to handle and the settings are straightforward. Great for detailed metal art.

Powerful Plasma Cutter

Cuts through thick metal smoothly. Very clean edges with minimal slag.

Professional grade

I use this in my workshop. Reliable and efficient.

Clean cuts every time

This cutter is precise and leaves smooth edges.

Fungerte helt topp!

👍👍👍👍👍

The machine is working good.

The machine is working good.

You need a good compressor to push enough air .

Great little plasma cutter.

Works great straight out the box

Love it

Cutter

Makes cutting metal quick and easy