Trennsäge 355 mm, 2800 W, verstellbarer Winkel -45° bis 45°

Kappsäge Gehrungssäge mit 355 mm Edelstahl-Kaltschnittsägeblatt & 3500 W bürstenlosem Motor & 750–1200 U/min

Sehr gutes Preis-Leistungsverhältnis. Die Maschine ist solide, einfach und stabil gebaut. Die Rechtwinkligkeit des Sägeschnitts in der Vertikalen ist sehr gut. Wünschenswert wären 200U/min mehr (nice to have), der Drehzahlbereich wie angeboten allerdings auch absolut ok.

Preis/Leistung ist sehr gut

Der Boden und der Anschlag könnten stabiler sein. Für den Preis aber hervorragend!

Ohne

Top Maschine, bin sehr zufrieden

Haas

Absolut hammermässig

Great value, clean cuts

Bought to cut metal balusters for our DIY project. Arrived on time and in a secure strong box. Despite some confusing comments from other reviewers my model works on standard US 120V outlet I have just started cutting the first few of approximately 45 hollow 3/4 metal balusters. Cut easily with nice clean edges. Clamping system works smoothly. Great value for the price. Much easier and cleaner cutting than using an angle grinder. Definitely recommend for home use projects.

Saw does not go faster than 500 rpm

had high hopes, but, not sure yet. Saw was a bit beat up, the guard binds, and upon attempting first cut, discovered saw reached max 500 rpm and 250watts, regardless of speed setting between 750 and max. Have a ticket in, and pretty confident the brand will fix. As is, saw is unusable, so cannot give it a rating better than zero.

No dan confianza

No puedo opinar porque aun no la he puesto en funcionamiento , pero la entrega nefasta total por la empresa de transporte

Motor bad

The motor was bad. Loud noise when running, then smoke came from the motor.

Qualité déficiente

La finition de l'appareil est vraiment légère. C'est peint alors que l'ébavurage n'est même pas fait. Le plastique semble de petite qualité. Il y a une protection caoutchouc à poser sur le volet qui est impossible à mettre car les formes ne correspondent pas. La goulotte d'orientation des copeaux est mal conçue et mal fixée, ce qui fait qu'elle ne tiendra pas dans le temps. En plus de carter à l'extrémité du moteur est cassé, ce qui a du se faire pendant le transport.

You need an atypical 20A/240v plug adapter, careful when ordering because if you don’t have 240v plug the saw will be us…

Awesome saw! Super powerful, clean, quick, smooth, precise cuts. Definitely recommend!

Bonne petite scie

Parfait pour des tiges d'armature et des petit profilés. Coupe très bien, la dimension maximale est d'environ 1.5 pouce pour un tube carré

Perfect DIY Chop Saw

What a great little chop saw perfect for DIY work cutting small size tubing or round stock either cold or hot rolled mild steel. Had to tweet the guard a little due to misalignment of screw no big deal now guard drops down as it should. It is a little loud without hearing protection but then again it is a little 1200 watt brushed motor which tend to be loud. The soft start up is nice so she doesn’t jump off the workbench. Comes up to speed quickly ready to work. First test was on some cold rolled 1/2” x 1/16” square tubing and it cut through like butter. Being a small blade compared to a 14” you have to let the saw do the work so you can’t just push down with a lot of force. If you use this in the way it was designed to be used should last a long time. As with any type of tool they are designed for a specific purpose and this one is for light duty DYI use. This quality of the casting and fast adjusting vise screw is also a nice feature. The saw was square out if the box which was a plus of attention to detail. It’s footprint is small enough you can store it just about anywhere when not in use. If you are like me space is a important commodity in a home workshop and she fits the bil…

would buy again.

4.5 stars. they failed to tell you the type of plug you will recieve and the fence and layout of the base for clamping purposes need work. with that in mind I would definitely buy this again, included is a short video review. https://youtu.be/6_q96NDEiKw?si=FXS_EoDKlILngJzb

Tuc Pham

Hi Technical support, My name is Tuc. I want to express about the quality of this chop saw: this is the second time to cut the mild metal. It moved so slowly only 500Rpm vs 2000Rpm as advertised, so weak. Can you help me out with this issue please. Thank you x much. Tuc.

good saw

I only do occasional metal work so I couldn't justify an evolution saw, this works plenty good

Lame de scie de très faible qualité

Après avoir coupé un quinzaine de morceaux de fer de diamètre raisonnable, la lame ne coupe plus, le métal chauffe et de nombreuses étincelles apparaissent Où sont les 3500 coupes sans problème comme promis ? La machine semble fonctionnelle hormis la lame de scie..

Fantastic hobby saw especially for 2020 aluminum

Fantastic for hobby users!! This is already paying for itself by saving the "cut" premium for short 2020 aluminum extrusion. I was building something and the 700mm lengths and 100mm lengths were the SAME price, sometimes more. So by buying longer and cutting I'm saving a ton. The clamp is great, similar to the dewalt I used to have before I sold it to move to a small house across the country to be close to family. The power is weak but with the blade size seems adequate. The blade cuts great. The only issue is the guard kinda sucks and needed some adjustment to actually work as a guard (loosen screw, bend it to not rub). I haven't tried steel yet, but blade speed is perfect, and not just a wood saw with a metal blade so with the right pressure I suspect this will cut steel just fine. But for aluminum 2020 it is fantastic (I didn't want to use my compound mitre saw I'm using for renos for aluminum and find metal bits in my oak trim).

Business owner

It works the same as a $600 table saw. I use to cut 1 1/4" aluminum tube 1/8" thick. It does the job so clean and as the knife go through the cheese! so light and portable. well worth it. A greater purchase than the cost!

Serra Circular

Para o preço que custa não se pode exigir mais. Media qualidade. Faz bons cortes a baixa rotação

Quality control must of been off

Saw works good .measuring device is in metric system .and the lenght adjustment was not properly tested thumb screw will not screw in .few issues with hanging guard likes to hang open .some safety!

Mavčiče 41, 4211 Mavčiče

Zadeva zaenkrat kar dobro funkcionira. Rezillno orodje sicer malo opleta, ampak deluje.

Welder

Great little chop saw... cut alum sq tube and pipe, cut steel 1x2 x.125 tubing, angke iron, 2x1/4 flat bar, cut fast and easily.. wish I'd bought yrs ago

Mr

Great price, great for DIY projects at home. Simple to setup and use.

Chop saw

Can't give good review, damage in shipping not usable.

Shop saw

I need to say that is fantastic saw. Power of 3500 W is amazing. I can recommend this product to everyone how needs good quality stuff for good price:-)👍

Scie à tronçonner

Machine bien reçue dans un bon délai. Elle a l'air bien conçue. La description indique une machine sans balais. Je ne vais pas procéder à un démontage d'une machine neuve mais je m'interroge sur le pourquoi elle est livrée avec des balais de rechange.

Works great can’t beat the price!

Works really good, very powerful. Only issue was the 220 plug was weird. I opted to install the correct outlet instead of buying an adapter and it only cost me a few dollars. overall you can’t beat the price. Cheaper than the comparable saw to cut metal. it doesn’t have it or I can’t find the armor off switch, but it’s kind of like any other miter saw that stays on when you plug it in

Cold cut chop saw

Works amazing i use it all day and it gives clean cuts no powerlag I'd buy it again

Couple of bolts were missing. Clunky design for the blade guard

The linkage for the safety shroud interferes with the motor housing as you're lowering the saw to cut. Kind of an annoying design flaw basically. Parts missing when I opened the box. Couple of bolts. WhiIe I understand it's not a top shelf saw, there's no reason for missing parts.

Great little cutter!

I have a larger metal chop saw but thought I could use a smaller one, so I ordered it and I can say with 100pct certainty that this machine cuts like a hot knife through butter! I'm very pleased with it to say the least, so order with confidence ppl!

Mr.

Very pleased with this saw on any aspect.

General contractor

Considering the price, it is very good, but the profile holders are not very precise and the cuts are not made at accurate angles.

Awesome saw, no complaints

After a few adjustments, I set the speed at 750 rpms and it cut thru square tube with ease. Nice clean cuts and spot on square.

Retired

Bought this to cut small bars and rods. Love it. Quiet, smooth operation and cuts square and smooth.

Mr.

Easy to use, some issues with the cutting disk cover that blocks and not closes completely and the ruler isn't placed accurately so using it gives an error of 4 mm. All the issues are easy to correct. Overall I am really satisfied and do not regret at all for buying it - worth every penny. The rpm control is very good and useful. I have cut rectangular pipes 50x30x3.5 mm and solid bar of C45 40 and 32 mm diameter. For hollow profiles works better than solid bar as expected but is much faster than the band saw

Owner

I have a small welding business an not in the position to purchase high priced equipment so I have taken a gamble on a few budget friendly items. After receiving the cold saw I had a 4×6" piece of metal tubing to cut and was extremely excited to try the saw out. After a few adjustments to line up the fence for the size of material it was the nicest cut and the metal was still cold when done. I am very pleased with my purchase and have share with others about the saw.

Great tool

Works really well this unit worked just as good as any name brand! I was really impressed with this machine!

Welding hoibbyist

I have the 14in big brother, but sometimes i am wanting to cut smalle pieces of metal. This 7-1/4in cold cut saw has been great, light weight and easy to use.

Mr

This is a 220 volt saw it came wired with a standard 110 volt household power cord. It came with a broken screw on the blade guard. Had to drill out broken screw and replace before I could use the saw. I live in the United States it comes with a built in ruler and it was in metric which is useless to me.

Mr

Saw works amazing, cuts everything I’ve thrown at it. Super easy to use and adjust the settings.

welder

this review is for the 7-1/4 chop saw. i have cut 3/4 rods to try it and it cuts metal like butter , its light weight ,and perfect for small jobs. i think this is the tool to carry for small projects out off the shop and it cuts without sparks. But don't forget to wear eye protection to protect you from metal chips projection. Happy with this tool.

Can't beat it for the price

Very basic but very useful tool. I can't believe I spent the money using an abrasive cut off as long as I have after using this.

Mr

The saw does its job, clean cuts. It has some issues like the cutting size for 45 degrees, as it can’t even handle a 1.5” tube like in the picture attached. I had to change the holder position to be able to do it in 45 degrees. Also the screw to change the degrees could have a fixed handle to make it easier to change. The 45 degrees is not that precise as in long pieces we can notice de difference.

Quiet and precise.

I bought this cold cut saw for my small workshop, and it has revolutionized my work. Thanks to its cold cutting technology, it doesn’t require cooling fluids, saving me time and money. The saw is easy to operate with intuitive controls and starts quickly with smooth operation. The durable construction ensures a long service life, and the blade can be easily replaced when needed.

Cold cutting, clean cuts.

This cold cut saw is an excellent tool for metalworking projects. It cuts steel, aluminum and other metals without excessive heat generation or sparks, resulting in clean and accurate cuts. The blade is sharp and durable, and the saw operates quietly compared to other cutting tools. The ergonomic handle reduces fatigue during long working hours, making it comfortable to use for extended periods.

Great price

Great little cold cutoff saw.

Mr

Works fine, swift delviery

prez

Awesome buy

Chop Saw

Works good