Skidsteer-snelkoppelplaat, 3/8", ontvanger 5,8 cm

Quick attach function

Quick‑attach design lets me swap attachments in minutes.

Good surface finish

Coated surface resists rust on the farm site.

Great value aftermarket part

Excellent value for this aftermarket skid steer plate.

Homeowner

This attachment came in a torn up box however there was no damage found upon inspection. The attachment fit very well on my kabota tractor and works well for my needs. One bad thing though, it came bare metal. No paint and already had surface rust. I have not had the chance to prime and paint it so it looks very rusty. But hey it works. I recommend it to anyone that may need this type of attachment.

not painted

it doesnt cum already painted but very easy to assemble very sturdy made it great product .

Stable under heavy load

Does not bend or twist under heavy working loads.

Skid steer plate

Just what I needed, on time, well made, highly recommended 👍👍

Honey Do list avoidance expert

Very good quality, painted well, allows for tighter maneuver of trailers as compared to the bucket clamp hitch.

Would recommend

I highly recommend this skid steer mount plate.

could have had a better paint job

They could have done a better job of painting and rust prevention but other than that it worked as advertised

Mr

Great plate attached easy to Massey Ferguson.

Solid attachment

This has been great for me. Move all my trailers (24ft camper trailer/16ft work trailer/16ft utility trailer) using my small tractor Kubota 2610. My last hitch broke apart and it was twice as much money. Value for cost here is pretty great. This would have cost thousands to have built locally here. I actually really like how they have the plate and receiver bolted on separately (you have to connect them) so if any issue happens, you can just replace that section, or if you want to fabricate your own attachment, boom you can just put it on.

Mr

This product was used to move a travel trailer 500 pound tongue weight and the framing of the attachment Ben

Tractor attachment

This works well for pulling my chipper with my tractor. I have an excavator attachment on the back, so I have to attach it on the front. I didn't realize when I purchased it that it wasn't painted, but it is a nice heavy attachment. The welds on the plate holding the hitch connection on are perfect. The tapped holes for the plate fit perfectly as well.

Me

Very well made , easy to use , well built , sanded smooth and painted orange , the same color of the rest of my equiptment , will buy again

Skid steer attachment.

Really solid fairly well built not sure about the hardware yet, but have used it several times with no issues really good piece for the price

Owner

It indicates it is for use up to 7,000 lbs. That is far from accurate. The first time it was installed with my Kubota SVL 75-3 in order to move a 21' camper, the mount plate bent. We lifted up the camper and watched it slowly sink back to the ground as the plate buckled. There is know way we even came close to attempting to lift anything near the rated capacity. It is scrap metal at this point after just one attempted use.

Owner

Rugged and work well used it to mount a 7.5 foot snowplow on my tractor.

Mr

Easy assembly and we'll made. Pictured as a painted or power coated piece but comes to you as raw steel. You'll need to finish it

Solid

This piece is stout, and perfect for turning my tractor into a small crane. I bought this so I could lift closer to the tractor for mechanical advantage. I welded a chain link to the bottom center and I use a shackle with slings. It works great, and I intend to turn it into a modular attachment adaptor.

Mr

Well made and sturdy. Nice welds. But the item is shipped without any paint or coating which is very annoying. An attachment that is used outside needs protection so it’s up to the customer to paint it.

Never order from here!

Received the plate, missing bolts and the receiver. The plate is essentially useless without the parts. Have went in circles via email for weeks with no resolution. They just keep saying my problem was sent to the appropriate office without ever solving anything.

Easy, not that heavy and high quality

Works great and is now saving wear and tear on my UTV when I need to position trailers in different areas on my property. Its high quality and frankly, I found I could pick it up and place it on my tractor connection manually without manuevering for a normal hook up process. Can't submit a photo, because the brand has a 2 MB limit on photos, like it's 1980 or something.

Heavy Built

This is a heavy built plate, you need to paint it. It comes un-painted and will rust. You can't make this plate for the price that is sold for. Very happy with this purchase.

Equipment operator

This 3/8” thick attachment plate with 2x2 receiver is a great value and well built it makes moving trailers and equipment around so much easier.

1/4 in mounting plate with trailer hitch attachment

Quality is very good, I could not fabricate this for half the price of what I paid. Comes with three quarter inch diameter bolts to mount the hitch plate too, however the mounting hitch can only accommodate 5/16 bolts so no way to attach the hitch plate to the mounting plate without welding it, unless you want to downsize the bolts to 5/16 diameter. Other than that, it fits my John Deere 314 g skid steer perfectly, and is used to move my 28 ft mirage snowmobile trailer loaded with four snowmobiles inside around the property. must be painted before you use it because it is raw steel, unpainted. Good quality product

Skid Steer Receiver Hitch Plate

The 3/8" receiver hitch plate is very heavy heavy and well constructed. The welds all looked good and the metal finishing was exceptional for the price. The only thing that was somewhat of a surprise is the metal appears to possibly be metal etched to control the rust but was not painted in any way. So this is something that is going to need to be done before bolting the receiver onto the plate and putting it into service. If the plate was going to be used indoors and not exposed to water, the factory etching may have been adequate although it would likely become surface rusted over time (there was surface rust already starting on it when unboxed). Left outdoors, it would likely completely rust up very quickly. I cleaned the surface rust off of it, metal etched & rinsed it again and will paint it with black POR 15 for a heavy duty permanent finish once it dries out.

Customer

Had to reinforce the center due to heavy tounge weight on a gooseneck trailer starting to bow the center out. Otherwise great product.

Owner

Much heavier than I expected as in quality and durability.

Seems like a great deal

Seems like pretty good quality, my daughter assembled it quickly and its definitely heavy.

Business owner

Bent it the first time I used it. Reinforced it, now it's great.

Farming

Good investment use it for moving trailers around

Contractor

Excellent plate with hitch receiver. Best deal anywhere and shipping was fast

Mrs

Only issue was packaging. Fedex does not take care of packages. I almost refused delivery because 1/2 of box was missing, and what was there was torn, box was left at end of road next to dumpster. Will only by from the brand in future if delivery is Not through Fedex.

P. E.

This thing should not be used for anything over 700#'s. Tried to move a trailer with a max 2,000# tongue load and the thing bent. Not sure I can even get it off my skid loader now I was worried about the bolts being a low grade 4.8. that was the least of my worries since they held up. The picture is after lifting the trailer and where it sprung back to. Do not buy for heavy trailers, works for light stuff

Estimator

The picture of the attachment plate is upside down which is irrelevant. The problem I had was that the attachment plate bent out in the area where the hitch receiver is. I would suggest making the plate solid all the way across instead of having that piece cut out and possibly add some reinforcement in that area. I had to weld a piece of 6" channel across the plate where the cut out is.

Kubota Grill Gaurd

I love this piece of hardware for my Kubota 2601. Now I can shuttle trailers around and also use my hitch mounted winch on the front of my tractor like a winch box. I couldn’t build this alone for the price of steel. It’s painted to match my tractor. Nice piece of kit to have.

Consumer

Overall, it is a good attachment. It is heavy enough and does exactly what someone with a small farm or small acreage would need to use. My only complaint is that it was not painted and did not specify that in description..

Stable Autonomous Operation

Autonomous operation is stable, no constant supervision needed. You can trust it to work on its own safely.

Great product

Great product at a great price!

Owner

Great solid Peace more than I expected

owner

Works like a champ

C

Everything rapidly and well

Flimsy

Flimsy