Tööstuslik kahesilindriline õhukompressor 2.2KW 116PSI

Drop in replacement Fortress ultra quiet 175psi

Worked great on my Fortress compressor. I bought it as a backup plan if I couldn't fix the older one which had an issue with the thermal switch inside. Now both are working and I put the new one on the shelf to use it later when the old one is at it's end of life Search YT for "Fortress ultra quiet 175psi..." to see how I did it

ajánlom

Két éve használom, vártam a véleménnyel. Nagyon jól működik, elsőnek ránézésre olcsónak látszik. de két év használat után kiderült hogy tökéletes. nem eszi az olajat. merem ajánlani

Compressor pump

This compressor work great better then the one that came on the tank would recommend it to anyone that needs a new compressor motor

compresseur

tres bien concue pour le travail que j'ai a faire avec

Maschinen Reparatur

Preisgünstiger und kompakter Kompressor.

Durable

This pump has been going strong for about a year. No complaints.

Use the belt and pulley calculator and get the right one.

So far 4 months I. It seems to work just fine once we figured the correct sized pulley for the motor.

Never got it going

I bought it with new motor it took for ever to pump up tp 50lbs when it did the air was so hot the air smelled buernt I never got past 50 lbs I’m a mechanic of 50 yrs and can’t for the life of me figure it out I’ve changes pulleys to slow it down I’ve bought pulleys to peed it up it doesn’t matter 50 lbs and hotter than the devil when you bleed the air tank steam come out it’s so hot

Compresseur et moteur

Très bon matériel même après 2 années aucune panne

New compressor head.

Unit looks good. Just need to finish the plumbing.

Quite impressed

Yea my pump came covered in oil too. I powered this pump with a 1.5HP 1750 RPM motor. Using a 6.25" pulley on that 1750 RPM motor results in 1041 RPM on the pump. I was pleasantly surprised to see the pump achieved 9.2CFM @ 90psi at this speed (formula adjusted for atmospheric pressure @ 1000m above sea level). You could easily underdrive the pump for longevity and still exceed the modestly advertised 5.8 As long as the pump lasts, it's a great buy.

Excellent product!

After 6 years of operation my 26 gallon Kobalt Quiet Tech called it quits so ordered this up as an alternative to buying an entirely new setup. As others have said, took a bit of modification to the base plate for install, but other than that it’s a simple fix and a great alternative to entire replacement. Bonus: quieter than original and has slightly larger displacement. Buy it and swap out your old one, no regrets!

Gael

Tête de compresseur de bonne qualité, et très silencieuse ! Dans mon cas de figure, la poulie côté moteur n'est pas assez grande, on tourne à 750 tr/min et on rempli tout de même notre cuve de 200L en moins de 5 minutes jusqu'à 12 bar.

Air Compressor Motor

This Oil-free Air Compressor M otor is very quiet..it's a nice upgrade to the Kobalt 26 Galon air compressor " Perfect fit"...did I say "very quiet"

Very Quiet Compressor Upgrade with One Minor Limitation

This compressor pump and motor assembly worked great for my project. I used it to repair a broken Kobalt air compressor that I picked up on Facebook Marketplace for a steal. The original compressor pump had completely failed and had actually overheated badly enough to catch fire. This unit was nearly a direct replacement, using the same mounting holes as the original pump, so installation was straightforward. The first thing I noticed was how incredibly quiet it is. I was honestly surprised. You can stand right next to the compressor while it's running and carry on a normal conversation without raising your voice. For a small air compressor, that's exceptional. The dual-piston design built into the motor housing provides a smooth, consistent airflow, and the overall layout is very similar to the California Air Tools style compressors. If you're repairing or modifying a similar compressor, there's a good chance this unit will fit with little or no modification. Air output is adequate for general shop use. It's not the fastest compressor I've used, but the low noise level more than makes up for it. It keeps up well for light to moderate air tool use, although with high-demand tools l…

Buen precio

Todo bien funciona perfecto y muy silencioso

Manually crank and add oil before starting

The cylinder head is small but works well. The only thing is that before installing it, it must be moved manually and oil must be poured in. Everything else is ok.

Very noisy

After all the hassle, I installed the pump, and it sounds like it is ready to fall apart. Our garage is 100 feet from the house and every time I use it my wife tells me it sounds too loud. It sounds like a running ROD KNOCK.

Parfait pour un vieux compresseur

Quelques modifications pour l’installation, parfait pour rénover un vieux compresseur

Very quiet pump

I’m giving it 4 stars because 2 of the cooling fins broke off during shipping but it doesn’t seem to hurt it any. The pump is so much quieter than my old compressor pump and fills the tank to 150psi in no time

Tête de compresseur

Acheter une tête de piston de pour faire la compression d'un d'une cuve de 500 litres c'est zéro même avec un moteur thermique la tête de compresseur ne fait aucune pression à se demander si il y a des pistons à l'intérieur en tout cas moi je suis complètement déçu de ce produit et en plus impossible à avoir les raccords de la tête à la cuve il serait peut-être judicieux de fournir un flexible adapté pour faire le raccordement de la tête de piston à la cuve

Super

Preso come ricambio al mio e devo dire che funziona alla grande. Identico al vecchio.

Compresseur 375L

Prix interessant mais débit d'air non conforme à celui indiqué. Carter inférieur non étanche : fuite d'huile.

Bon produits

Cette pompe à air fonctionne très bien, rempli un réservoir de 30Gal en 2 minutes

Maximale efficiëntie.

De luchtopbrengst is indrukwekkend. Zelfs bij langdurig gebruik blijft de druk constant.

Intelligente Lösung.

Goede kwaliteit voor de prijs. De materialen voelen stevig aan en de prestaties zijn uitstekend.

Angenehmes, fließendes Erlebnis.

De koelvinnen doen hun werk goed. De pomp blijft relatief koel tijdens langere sessies.

Sicherheit als Priorität.

Ik gebruik hem dagelijks voor banden oppompen en houtbewerking. Tot nu toe geen enkel probleem gehad.

Nicht überzeugt

Leider war ich mit der Pumpe überhaupt nicht zufrieden. Lief bei mir nicht richtig und machte keinen zuverlässigen Eindruck. Habe sie deshalb wieder zurückgesendet.

Good compressor head

Have it for a year with regular use, still operating correctly.

Meister

Top für dass Geld hält schon zwei Jahre ohne Probleme durch und das auch bei landwirtschaftlichen Einsatz

Performs as advertised

Pump works as expected, my compressor actually works better that it has ever done from new. its taking 4 1/2 mins to fill a 100lt tank to 8bar and is able to constantly supply my sand blast cabinet with 115 psi . Happy with the purchase.

Topkwaliteit prestaties.

Degelijke constructie en weinig trillingen wanneer correct uitgelijnd. Werkt verrassend soepel.

👍

Depuis le temps aucun problème, fonctionne parfaitement

Qualité au rendez-vous

Belle qualité, fabrication plus sérieuse que l'équivalent chez Compair luchar c'est dire !! Débit mesuré de 340l/minute soit un peu plus de 5 minutes pour charger 200l à 8.5 bars. Prévoir huile ...

Field Tech Owner

Rebuilt an ingersolrand air compressor unit using this pump instead of the original works great. No complaints it build pressure great and maintains with no leaking or over reving with the engine i paired to it

Bueno

Muy buena relación calidad-precio! Lleva un mes funcionando correctamente!!

Owner D.S.I. (Dragon Scale innovations)

It works. Pumps air. But no were near the CFM stated..it was to replace a head with the exact cfm rating it has. Peck 11 cfm at 90psi. It takes 3 times as long to fill my air tank. Will not keep up to my plasma table.my single cylinder 5.1 CFM 20 gallon tank spare compressor dose. That being said this unit dosen't even put out 5.1CFM let alone the rated 11 CFM.. Waste of money It is mounted on a 60 gallon tank. Campbell hausfeld unit same size pulleys same rating as the old head but dose not even come close to its rated air supply. Another instance of false specs from an off-shore company. The little red compressor in the photos is the 5.1. Cfm. And I teed it in to the big tank. As it keeps up with my plasma table. And the unit is just there for back up as it won't keep up to the table or air tools.. It's just a small single cylinder unit a with a small rating. But is twice the unit of the 2 cylinder 11 cfm unit. Buyer be wear. I have videos of the little unit filling the 80 gallon tanks in half the time as the new head I just installed on the tank. File is to big to up load

Air compressor pump

I have purchased many items from the brand and my last purchase was this air compressor put the first one ran for about 2 months with no issues untill it locked up I contacted the brand and they sent out a replacement so far the new pump is working really well hopefully this one last a while the brand for the win.

BIen pero con un gran pero

Le falta información técnica y descripción de algunos detalles para hacer la conexión neumática, lleva una tuerca bastante dificil de localizar, seria mejor que dejaran una conexión de 1/2" Gas Hembra para que cada uno usara el sistema que quiere...El manual lo veo escaso por eso no le pongo un 5

Hält nicht wirklich lange durch.

Ich habe mir diesen Verdichter im August 2023 als Ersatz für meinen 35 Jahre alten Kompressor zugelegt. Kesselgröße 90 ltr. Motor 400V / 3KW. Alle für den Umbau erforderlichen anpassungen, wie z.B. die Motordrehzahl, wurden anhand neuer Riemenscheiben Motorseitig durchgeführt. Der Verdichter wurde so die letzten 2,5 Jahre im gelegentlichen Betrieb (max 1-2h pro Monat) benutzt. Gesamtlaufzeit seit einbau max. 70-80 Arbeitsstunden. Die Montage war sehr einfach und er hatte auch bei Inbetriebnahme schnell den max. Kesseldruck von 8 bar erreicht. er hat die ganzen 2,5 Jahre auch ohne Probleme gelaufen. Der Kessel mit einer Größe von 90ltr wurde immer schnell innerhalb von max 1,5 bis 2 Minuten mit 8bar befüllt. Die Gräuschentwicklung und die Vibrationen hielten sich in Grenzen. Doch leider jetzt, nachdem die Garantie abgelaufen ist, schafft er es nicht mehr über 4 bar zu pumpen, was auf ein defekt der Ventilplatte hindeutet. Wochenlange Recherche hat keinerlei Ersatzteilversorgung erbracht. Selbst über die Marke, ist ausserhalb der Garantiezeit keine Ersatzteil-Versorgung gegeben. Mein Fazit: Ich werde mir jetzt lieber ein teureren Verdichter eines Namhaften Hersteller kaufen, wo mir die E…

3 hp air compressor pump

Very good quality for the money. Easy to install with basic knowledge. The downside is, the drain plug for the oil change is impossible to drain unless you pull the pump off and turn it upside down..

Très bonne tête

J'ai acheté cette tête de compresseur pour remettre dans un ancien caisson avec le moteur électrique, vraiment très content de l'ensemble fonctionne très bien, brancher sur cuve de 500 litres cela met 20 minutes pour remplir la cuve vide mais comme elle n'est jamais enterrement vide j'en suis très content

Not cfm advertised

Unfortunately this pump takes significantly longer to reach cut out pressure then the 20 year old one it’s replacing The pump itself also gets unusually hot , I am very doubtful it will last Long at all

sir

Note: read the manual when used with a 2 pole 2880 rpm. motor you should use a 100 mm 4” V pulley whel on the motor making the unit run with 1080 rpm.

1/2

Came without filters or vent plug, the brand wasn’t helpful at all. Don’t buy at the brand

Compresseur

Après une première livraison d'un produit défectueux, 4 semaines d'échange d'explications. Un autre produit m'a été livré, conforme et complet.

Testa compressore

Manca un vero libretto istruzioni, ci sono elementi che non è indicato cosa servono e dove utilizzarlo. Manca indicazione tipi olio

Gruppo pompamte

Complimenti, montato e funziona alla hrande

auto nut

I have a California Air Tools Compressor model 10020C that started making a lot of noise and had low output. This pump looked very similar and the specs were the same. The factory replacement pump was more than double the cost. This arrived quickly and packaged very well. There are a few minor differences but nothing that matters. In fact the main components look identical. If you feel comfortable changing out a pump then you will be fine. After replacement the compressor performed just like new. If you have a CAT 10020C then this is the replacement for you.

Parfait

Parfait avec ma cuve de 500l 6min pour remplir à 9bar de pression

Kompressor Motor

ich bin sehr zufrieden- schnelle Lieferung, professionell und sehr gut verpackt und hervorragende Qualität zu einem guten Preis

Owner operator

The compressor works good. I just wish I had gotten a larger cfm compressor .

Nice compressor

This is a nice compressor. I used it to replace an Ingersol Rand S3 that was 26 years old and needed a new valve plate. The compressor was half the price of a new valve plate for the S3. So far it seems just as good as the S3.