Good product
Used on a husqvarna rider mower. Fits with very little modifications.
Vælg dit land og sprog for at se de korrekte priser og leveringsbetingelser for dig.
or 3 interest-free payments of €28,00 with Klarna
Forsendelse fra EU-lager · Sporet levering
Spørgsmål før du køber? Ring på +351 308 802 194 (døgnet rundt) eller skriv til essenza@myessenza.eu
Tracket levering til hele EU
Gratis fragt
Returnering inden for 14 dage
MB WAYMultibanco
Sikker betaling · Faktura med moms fra dit land · Support på e-mail inden for 24 arbejdstimer
Dette gaffeltrucksæde er designet til at give alsidighed og sikkerhed i forskellige arbejdsmiljøer. Med et udvidet justeringsområde for monteringsslidserne på 16-34 cm passer det til mange maskiner, fra små manuelle gaffeltrucks til store dieselmodeller, og er derfor ideelt til professionelle, der ofte skifter mellem forskellige køretøjer.
Dette sæde er nemt at montere, da det leveres professionelt formonteret. Tag blot produktet ud af emballagen, og monter det direkte på gaffeltrucken. Systemet til justering af monteringsslidserne gør det muligt at tilpasse sædet til forskellige maskinkonstruktioner, så det bliver nemmere at skifte mellem køretøjer, og brugerens driftseffektivitet øges.
Dette universelle sæde er velegnet til alle, der søger et gaffeltruck- eller traktorsæde, som kombinerer sikkerhed og funktionalitet. Det er især nyttigt på lagre, i logistikcentre eller udendørs, hvor fugt kræver effektiv dræning, og streng sikkerhed ved aktivering af udstyret har høj prioritet.
Trackingforsendelse til hele EU. Gratis fragt, undtagen til øerne (beregnes ved kassen efter vægt). Returnering inden for 14 dage — se vores Refusionspolitik.
Ofte stillede spørgsmål
Den forventede leveringsdato står ovenfor. Vi sender med sporingsnummer og mailer dig linket.
Gratis fragt til fastlandet i Portugal og Spanien og resten af EU. For øer beregnes den ved betaling.
Varer, der skal samles, har vejledning og beslag i kassen.
Ja, du har 14 dage fra modtagelsen til at returnere den. Se returnering
Med kort eller Klarna · MB WAY · Multibanco, sikker betaling.
På e-mail til essenza@myessenza.eu eller via butikkens chat.
| Længde | 51 cm |
|---|---|
| Bredde | 50,5 cm |
| Højde | 36 cm |
Good product
Used on a husqvarna rider mower. Fits with very little modifications.
Very comfortable seat
Fantastic seat very comfortable was hard to install but that was cuz my usecase was definitely not intended for this seat
User
Didn't like sitting in The hot sun. I was surprised at the quality when it arrived just wished it lasted more than a couple months. The glue failed i think it was the heat
Seat
It's a little difficult to lock the slider in place but was easy to install and very comfortable. I would buy it again.
Good seat ,needs more bolt patterns
Seat is good quality, but could have more bolt patterns to make it more universal. I needed to make a different set of brackets to attach to my older Kubota.
Repair shop
These work great a little work and you can make them fit
Gérant
Répond à nos attentes. Quelques modifications à apporter pour remplacer l'ancien siège mais cela a été relativement facile.
Hurts your a$$hole.
Very uncomfortable, has a raised hump in the center that pushes against your a$$hole. If you have hemorrhoids, this is not the seat for you.
Nice seat for money
Had to adapt seat switch, but worked great
Easily adapted to our non-typical seat base.
This thing has multiple ways to set it up and adjust it to fit. Very pleased with this purchase.
Seated
great seat ' very comfortable easy to install . fast delivery. Thank you
Tractor seat
Very nice seat, well made, great comfort, excellent quality, fast shipping, very pleased with my purchase.
Can't beat them for the price
I love this seat over what I removed from my Forklift it is night and day. Thank you
Buyer
Very nice seat. It was heaver and better quality than I expected. It fit my tractor and works very well for me.
Siège
Le deuxième acheté, pour un micro tracteur d’abord puis pour une tondeuse automotrice. S’adapte sans difficulté aux deux engins et environ 3 fois moins cher qu’un origine. Pas d’hésitation !
Mr
Very good and robust seat for my lawn mower with adjustments both ways that makes the seat easy to fit.
S'adapte facilement
j'ai remplacer mon vieux sièges sur un Kubota g2hst par le siège. il y a tellement de possibilité de réglage sur le siège qu' en moins de 10mn le sièges était remplacer. Montage facile et de super qualité. livraison rapide
Excellent super ajustable
Excellent car les 4 vices sont ajustables dans le sens de la largeur (le tondeuse dans le sens de la profondeur) et donc installer en moins que 5 minutes.
Rider
It took a little modification to fit my craftsman mower but it did.
Siège chariot
Acheté pour remplacement du siège HS sur micro-tracteur Iseki TX1500. Convient parfaitement après confection d'une platine d'adaptation. Très bien, je recommande
Siège
Bon produit facile a installer seul bémol les rails et le système de réglage du siège fragile a mon gout et il faut avoir la bonne boulonnerie. Mais je ne regrette pas
Lawn Tractor Replacement Seat
Worked great as a replacement for an older, worn out seat on a lawn tractor. I saved the old seat's mounting plate/hardware and had to make some minor modifications to make it work, but it wasn't an issue. These seats with a drain hole are a great design - pooling water is one of the main reasons I frequently have to replace these.
2010 Cub Cadet Volunteer
The original part #s for my Cub Cadet seat was 757-04097 or 757-04008A. I was not able to find a direct match. I ordered Milsco XB200 as it was supposed to work but it didn't. It sat way too high. The one I bought from the brand works! It was inexpensive and shipped fast. It is designed for a fork lift, and came with the slide hardware which I did not need. My only negative is that the back is very low, so if you are just sitting in your side by side relaxing, you won't want to lean back in it. But otherwise, it's a winner.
Excellent seat. Excellent value
I bought this seat to replace a well worn seat on my Craftsman garden tractor (LT2000) and it worked perfectly. The seat rails give good adjustability and the drain holes are a welcome addition over the factory seat - no more drying the seat after a rain. It looks to be of high quality as compared to the seat i have in my Bobcat, so am expecting years of use.
Not quite universal
This was a lot less expensive than a Kubota seat. However, for our T1460 mower, I was unable to use the sliding feature and had to bolt it directly to the existing frame. Also, I am used to parking this mower in the open, as a result the sun deformed the plastic strip securing the seat cover.
DIY
Mounted this on a small Yanmar tractor. Worked great! Did have to grind off the old seat bottom and attached to the seat to make it work for my purpose. But ultimately this is a very nice seat and very sturdy.
Engineer
Very pleased with the quality of the seat for the price paid. Seat was fitted to a 40 year old Bomag roller, (almost identical in size). It didn't quite fit existing bolt holes, so 2 simple brackets made, it now fits and adjusts perfectly. Seat is quite firm to sit on but comfortable, good cover and drainage holes should protect it well when machine is left outside. Would definitely recommend if you are looking for a tractor seat of this size and shape.
Easy on the backside
Seems decent quality wasn’t to bad to install and hopefully lasts years. Easy install on my wheelhorse 310-8
Lawnmower replacement seat
I gave it a three-star because we've only used it once and the material is coming apart.. It was very comfortable although we only used it one time it's very disappointing that now The seat is coming apart however this won't let me upload any photos of it I've tried to upload twice.
Good Seat
I got this seat to replace the old worn out one on the used towable backhoe that I recently purchased. I didn't use the sliding rails, so I don't have a comment on the quality of that. The bolt pattern wasn't an exact match to the old seat (I wasn't expecting it to be) so I drilled two new holes in the backhoe to match the new seat pattern. I used spacers under the seat pan to let the water drain through as designed. So far it definitely is a lot nicer than the old seat that was ripped to shreds and had duct tape patches all over it!! It seems like it is just as good as any other tractor seat I have seen, so I imagine it would last several years out in the weather and it would last almost forever if parked inside.
Dr.
Beau siège, Je l'ai monté sur un tracteur ancien monocylindre diesel Il offre l'avantage d'être bas, Il s'intègre bien mais le rail a beaucoup de jeu pour réduire ce désagrément il vous faut le bien graisser et l'ajuster glissant juste.
Former MLA
Found these seats very easy to fit to a greenfield mower and a kubota, seems they will fit any mower
mr
all good reasonable price nice product fast shipping, good quality A A A + + + recomanded
Great seat
I was skeptical of this seat but bought it because of the price. I was pleasantly surprised. Works great on my garden tractor. Like all universal seats, it takes some time to adjust the mounting to fit the application but was very easy to install. I will buy another and have recommended it to several other people.
Traktorsitz
Habe ihn noch nicht montiert, werde aber demnächst den Sitz installieren. Sieht gut aus und stabil.
Good quality
Great quality good as the factory seat
Funciona perfeitamente
Serve perfeitamente para a utilização
sedile universale
Ottimo sedile
Great product
Quick delivery and easy installation
stoel
goede kwaliteit
Mr
Ok I guess
Forklift sear
Perfect,easy to fit,does the job fine
Tanks small engine repair and welding jobs
A little figuring out and they fit
Beautiful
Hard to install but looks great
👍
Passt Perfekt rasche Lieferung
Don't recommend
Started coming apart after a month
Rugleuning ligt ver achter over
Rugleuning ligt ver achterover
Montage du siège
Monter facilement en quelques minutes