Bank Vijzel 10 cm, kracht 19 kN, staal en gietijzer

impec

tres bien, un p'tit poq sur la semelle , un bon coup de pierre et c'est reparti...

Good Quality and service

The item appears to be good quality and well made. I haven't used this item yet. Still waiting on new milling machine to arrive. Service and delivery was excellent.

Hervorragende Qualität zum Super-Preis

ein total super toller Schraubstock - hervorragende Verarbeitung - TOP ABSOLUTE Kaufempfehlung!

Article déjà utilisé ?

Ma note n'est pas que pour l'étau, en effet ce dernier est très qualitatif, bien usiné et ajusté. J'en suis très satisfait. Cependant, il semble déjà avoir été utilisé. J'ai retrouvé quelques copeaux, et une marque de perçage dans le fond de ce dernier ( plus qu'une marque d'ailleurs, un trou sur le filetage). S'il n'était pas aussi lourd, j'aurais demandé un retour ou un remplacement, mais au final cela ne semble pas modifier les fonctions de ce dernier, notamment grâce à sa qualité de fabrication.

Calitate excelenta. Preț imbatabil.

Comparativ cu alte firme, prețul este mult mai mic la același nivel de calitate.

good value

appears to good quality and well finished for the price. To be fair I've only just unpacked it and not used it yet

Mecanizado pésimo

Mal, el mecanizado de las chavetas de centrado no está alineado con las mordazas en los 160mm de ancho está desalineada más de 1mm.. tengo que mecanizar la para poder usarla

pretty nice vice

the vice is HD and machined well for the money its amazing. I will note to the buyer. the crank that comes with the vice Falls off. when I have some time I will drill and tap a spot for a set screw but well worth the purchase.

Pratique pour les petites pièces à usiner

Je l'utilise sur ma fraiseuse, idéal pour les petites pièce.

Good vice for the $$, can also be improved.

Good small mill vice for much less money than the pro brands. ground surfaces are within the tolerances you would expect. Some cost savings have been taken like hidden surfaces under fixed and moving jaws are not ground. If you have the means to grind or scrape these, then a very good vice can be had for small cost and a little effort.

Morsa 100mm

Prodotto come da descrizione, arrivato completo e ben imballato, è fatta bene, precisa e chiude molto bene. per me ottima

5" super lock vise

Heavy vise that is sturdy, accurate and easy to mount.

Impressive vice

This is a very impressive machine vice, especially considering the price. Thank you

Manufacturer engraver

Strong and massive, straight, jaws straight, strong grip. Fast shipping, cheap and professional. Will buy again

Start up business

I was very surprised by the high quality of this vice vs the price. Old beat up vises this size cost 3x as much and other brands are $500 to $600. Very satisfied with all my purchases!

Helt nöjd med detta köp

Mycket prisvärda skruvstycken. Tror backarna är inslipade efter montering. Snabb leverans och väl förpackade.

Quality control issues

I ordered two vises in hopes they were close to the same height so I could hold one long piece of aluminum with the two vises. Height difference was almost 1mm.

Preis Leistung ok

Preis Leistung sind ok. Im Azslieferungszustand sind alle bearbeiteten Kanten nicht entgratet und sehr scharfkantig. Aber kurz mit der Feile drüber und alles ok.

Mr.

Overall is a good buy. I would prefer a lower profile for my milling machine. Straight flat surfaces. For a garage work is pretty decent. Good price also.

Good product👍

A good product for the price and can be recommended👍

Excelente compra

Me ha fascinado esta prensa. Es una maravilla. Muy robusta. Excelente producto para realizar mis trabajos.

Wow

Super Schraubstock, Schienen sauber geschliffen, sehr robust, sehr schwer, Preis Leistung ist TOP

Pas mal

Petit problème d'équerrage entre le mors fixe et les patins centreurs qui s'engagent dans la rainure de la table. Il y avait 5 /100 iéme de faux équerrage sur la longueur du mors qui fait 120 mm, j'ai dû bricoler les patins pour rectifier le problème.

Retired home inspector

The vise is very impressive in all aspects. My only concern was the packaging. It appeared that the box was dropped during transport and subsequently the foam packaging was broken in some cases but the vise was not damaged. As a result of the damage, the manual was scuffed and torn beyond repair. I was unsuccessful in obtaining a replacement copy via your online service and unfortunately did not find a download version in the internet.

Nice piece!

A real heavyweight that the post office had a bit of a struggle with. A lovely, precise vice. I just filed down a few sharp edges on the underside, but at this price it’s unbeatable. It’s precision-made and, thanks to the design of the guide, it doesn’t pull the clamped material upwards like a simple vise that is used normally with a column drill.

pensionato

bella ,precisa , ben protetta. ottimo acquisto

Herramienta robusta

Despues de un tiempo usándola, debo decir que cubre todas mis necesidades, excelente fabricacion a un precio muy accesible, las mordazas al ser reversibles te da la posibilidad de coger gran tamaño de piezas. Construcción robusta y duradera.

Good for the money.

This is a decent little drill press. And it has a bunch of nice features, including a digital read out for rpms. The truck had some run out. And it’s not that Ridgid. But for the price, I don’t think you could really beat it.

Me

Perfect for my milling machine and not too expensive ✅✅

étau de bonne facture

ensemble des parties fonctionnelles rectifiées ,massif ,plateau orientable .Bon produit

Till fräsen

Lagom storlek passar perfekt till min fräs men lite glapp i gängan

Mr

bought it for my shaper resto and it works great would of got the 6inch but not avialabe at the time still a very strong and well built vise

DIYer

Fits well on my small milling-drilling maschine, acured construction but the jaws are not hardened ?

Excellent vise for the price

Nice vise, quality is good. Just need to remove a few sharp edges on the finish. Accurate to .0002 on the jaws. Would buy again

Retired Machinist

Very good quality and workmanship. I definitely have no second thoughts about this purchase. Operates very smoothly and hold solidly during heavy cuts made with mill.

Owner

Completely misrepresented in the photos and description. This vise does not have ACME threads. It has standard metric bolt threads. This is a huge difference in the quality of the vise. The vise at this price point will do everything thing I need it to do, but I was expecting it to match the ad and pictures.

BRICOLEUR

J'ai commandé une 4 pouces qui normalement pour me fraiseuse vertical Troie pouces mais elle fonctionne à merveille sur ma fraiseuse vertical DE 1 1/4 HP

BRICOLEUR

Très belle OUTILS mais malheureusement commander vraiment trop gros pour ma fraiseuse vertical mais je la recommande pour des fraiseuse vertical de trois HP et plus !

Mr

Fait le job, bien conçu, pas de jeu, serre bien les pièces sans devoir forcer comme un âne. Fixe sur un chariot de fraise (acheté sur la marque également, c’est parfait pour la perceuse sur colonne

Great Value

1. Price) Great value for this item. 2. Quality) On par with my other pro-level equipment. 3. Features) Great set of features. 4. Easy to use) Very easy to use and set up.

Decent price for the price.

Mounts easily, feels heavy duty and weighs a lot. Jaws are not parallel. Threads are really tight and hard to turn. Takes 2 hands to turn if not bolted down. 1 to hold the vice while you turn the handle with the other. As much as it weighs the handle should spin freely.

5-inch ACCU Lock vise

Unit appears to be well made and measures square across vise jaws. Is very heavy and works well on my bench top milling machine. Vice screw does bind a little and requires using a wrench to adjust. Definitely an offshore product but cost hundreds less than name brands and will work for my hobby machining. Might be a little big to use on a smaller drill press.

euer Lordschaft

Der Schraubstock hat für den Preis eine sehr gute Qualität und Genauigkeit. Er erfüllt meine Erwartungen und ich benutze ihn auf der Ständerbohrmaschine sehr gern.

tremenda

Una prensa ,del todo profesional, solida,pesada, con un aprieta espectacular, lo unico por poner un pero, es que la manivela no tiene un tornillito de sujeccion y se puede salir facilmente, por lo demas satisfecho, la compré para usar en el taladro de columna junto a la mesa de coordenadas, pero el peso del conjunto es brutal, asi que uso una prensa mas sencilla y esta para trabajos que necesiten un apriete mas potente.

Dommage que la version sans oreilles de 160 soit abandonné

Je suis déçu de voir que l'étau de 160 type machiniste sans oreilles ne soit plus proposé! J'en voulais un ou deux supplémentaires pour ma fraiseuse, mais obligé de prendre un qui semblait presque pareil mais tout de même différent... Le bleu est 8,6mm plus bas que le gris. La poignée est différente mais compatible. La vis du bleu est bien plus dure à tourner que le gris. Il faut vraiment y aller... Même huilé. Autrement les fixations fournies sont pas mal mais il manque les rondelles pour pas que les écrous traversent. Les lardons de centrage seront à usiner évidemment. Autrement ils sont très ressemblants. Les trous au dos en M10 permettent de visser un gros profil pour fassiliter l'alignement quand vous voulez les jumeler. (Barre usinée bien planne et épaisse évidemment.) Une fois mes cales pour le surélever faites, je vais pouvoir les utiliser en jumelés. Mais franchement dommage que la marque arrête une référence qui était très bien!

Ottimo acquisto

Morsa molto precisa, l'Ho dotata di parallele, con una spesa contenuta posso fare fresature molto precise, Ottimo!

finish was appalling and the accuracy was not up to spec.

The cast recesses for hold-down had large areas of razor sharp jagged areas, a serious injury risk. No de-burring was done anywhere, even the chamfers needed de-burring! The whole unit was full of casting / machining grit, cast flashing and required a complete tear-down and degrease / wash out and finishing with a rotary burr. The machined recess for the thrust washer had a large sliver of metal which caused jamming. The fixed jaw had 0.15mm of vertical run-out.

recomendable

tiene una gran agarre y esta super bien la uso muchisimo merece la pena comprarla en el taladro de columna grande q esta instalada me viene de maravilla

Ottimo prodotto

Ottima morsa che assolve pienamente le mie esigenze. una pecca è il fatto di non avere una tacca di riferimento per la rotazione, ha solo la scala graduata di 360°, quindi se hai bisogno di fare delle rotazioni, bisogna farsela da soli....

Gutes Material

Der Schraubstock besteht aus einem guten Material (vergüteter Stahl) und ist mechanisch gut verarbeitet. Der Planschliff ist ebenfalls gut. Gut einsetzbar für ein genaues Arbeiten. Preislich könnte er einen Ticken niedriger (in den 60ern) sein aber noch noch okay. Insgesamt Gut 👍

.

Arrived in good time, well packed and in good condition. The finish is excellent and it is easy to use.

Prensa de precisión para taladt o fresadora

Buena prensa de precisión buen material muy practica y confiable utilizada ya en varias operaciones de taladrado y fresado muy satisfecho con la compra

Engineer

Fin maskinstikke. Mye for pengene. Fungerer helt fint til mitt hobbybruk. Kjøpte først en. Anbefalte og kjøpte en til min bror også.

Mr

Very nicely built - good quality and not a lot of cleaning up before using. Accurate