Graveerklem kogelklem 7,6 cm, 360°, gereedschap

Great value.

I have been using this little vise for a few weeks now and it is good. Perfect for serious hobby work.

Blown away with this 5 inch ball vice - love it!

I am so pleased I found this vice. For the money I paid I was unsure of what to expect - but it has exceeded my expectations. I bought the larger heavier one as I want to learn engraving. I am seriously impressed - it spins smoothly - has significant weight and stability. I am blown away by this vice - I am so.ease I purchased it.

Quality Jewellers Vise

I was pleased with the quality of this tool and also very affordable. It arrived in excellent condition and quickly. It operates smoothly and has lots of weight. Thank you.

Contente

Déjà testé en stage de bijouterie, contente d'avoir reçu le mien que j'ai hâte d'essayer.

Preis/Leistung sehr gut

Für den Preis wirklich sehr gut! Nichts rostet. Funktioniert nach 2 Jahren noch immer gleich gut! Achtung bei den Spannwerkzeugen, es halten nicht alle gleich gut, manche haben einen zu dünnen Einsatzstift.

Imbattable

Comme toujours avec la marque, excellent rapport qualité/prix pour ce qui concerne la bijouterie/joaillerie; je ne vois strictement rien à dire de négatif sur ce matériel, j'ai par contre toutes les raisons d'en être ravie!

Incredible value

Works like a charm. I'm thrilled to get a high quality ball vise at a fraction of some of the top of the line name brand units.

Very solid and well-made engraving ball vice

Very solid and well-made engraving ball vice with attachments.

Super Perfecto,esta es una herramienta indispensable para un joyero

Al comparar el precio de esta herramienta con el de una prensa de bola profesional para joyería, que ronda los 800 € o más, uno se pregunta qué podría fallar, pero no he encontrado ningún problema. Funciona a la perfección siempre que se mantenga limpia y en buen estado, lo cual es muy fácil: basta con aplicar un poco de aceite lubricante ligero donde sea necesario si se va a limar mucho, luego soplar el polvo y cuidarla bien. Quizás la prensa de 800 € esté hecha de materiales de mejor calidad, pero he probado ambas y, sinceramente, sería una tontería gastar tanto dinero en una prensa cuando esta funciona perfectamente para lo que la necesito. Quizás si se van a colocar diamantes u otras joyas preciosas, convenga revisarla, pero yo no he tenido ningún problema con ella, que consiste en cortar cobre y latón y usarla para sujetarlos mientras hago otras cosas como soldar o dar forma. No ha fallado en absoluto; solo hay que tener cuidado de soldar pequeñas cantidades con un soplete muy pequeño, y digo pequeño, porque de lo contrario se dañará la prensa. Reitero que es perfecta para lo que quiero hacer con ella. Para cualquier grabado, esta es una herramienta indispensable para un joyer…

It works for me

Just what I needed. It’s not the top brand quality fit and finish but it does the jobs I bought it for for a whole lot less money.

A must-have!

It is a great tool and a must-have for engraving and stone setting. Solid, smooth, and easy to use—it makes precision work much easier. Highly recommended!

Nice, but you WILL need to use up a pint or two of degreaser.

Let's be honest. It's from China. It is covered with a thin, but very smelly, coat of chinesium. The base looks like a small, real rubber, industrial, tire, and smells JUST LIKE the PA farmshow. ( which is NOT a bad thing. You know if you know...) You WILL need to thoroughly clean and degrease this thing, cause it smells horrible, the grease will get all over EVERYTHING. I had to take it to pieces, and washed it off with brakleen. Both to get the grease off, and to clean off an AWFUL LOT of small chips, which were grinding inside the vise ways and screw. It was VERY crunchy. Once you get it clean, well, mine is fairly smooth, and will likely wear in over time. The fit on the pin-pieces is blond one tight. They wouldn't actually go in until after I washed all the machining grit off. AGAIN, this is NOT a negative. The 5 inch I got is machined to very tight tolerances. I don't own another vise like this, and won't be getting another one until someone shows me something 5 times better. Which I don't see happening soon.

Joieria

Molt útil i fàcil de utilitzar .per clavar pedres a les joies per fer joies ben acabades es fàcil i molt útil

An sich Okay, mit etwas Nacharbeit Super!

Es scheint sich um Sandgussteile zu handeln, die nach dem Fräsen der Laufflächen direkt vernickelt wurden. Die Passungen lassen wirklich zu wünschen übrig, und die Feststellung der Rotation hat etwas gewackelt. Es passen auch nicht alle Teile richtig in den Zubehör-Halter. Ich habe das ganze Ding gleich so weit es ging demontiert und vom dicken, bräunlichen Fett befreit. Überall habe ich mit einer Feile entgratet und kleine Gussdefekte korrigiert (die Vernickelung ist dort jetzt natürlich durch). Die Laufflächen haben alle ein Teflon-Gleitband draufbekommen, sodass sie nun fast spielfrei sind. Bedenkt aber, wie viel Spiel die Passung vorher hatte, dass auf beiden Seiten eine Schicht von diesem Band dazwischen passt (2x 0,13 mm)! Der Drehmechanismus ist unter einer Zweilochmutter mit Außengewinde (!) verborgen, für die ich schnell einen passenden Stirnloch-/Zapfenschlüssel (30 mm) 3D-drucken musste. Darunter kam mir ein größerer Span entgegen, womöglich noch vom Gewindeschneiden, der wahrscheinlich irgendwie das Verdrehspiel verursacht hat. Die wichtigsten Zubehörteile (für mich die Backen mit den kleineren Löchern und die Ringhalter) haben ebenfalls signifikantes Spiel, wenn sie ei…

Lord of the Rings (so the girls say)

This Ball Vice is a great item for jewellery making. It is quite heavy but it needs to be for effectiveness. The 'extras' make the ball vice a completely useful bench tool.

Laser engraving

I have used this a couple of times for engraving. I like the weight and the ability to manipulate its holding stance.

Kugelschraubstock

Gebraucht gekauft. Leichte Rostspuren, sind aber leicht wegzuputzen und keinerlei störend. Zubehör war noch in Zellophan eingeschweisst. Kugel hält gut in Kunststoffschale. Alles Top.

Fit for purpose

Cheap, not to wobbly, good for beginning ;) But the rubber stand is smelly a bit

boulet de graveur

Outil très pratique et très bien étudié pour le travail de gravure. très solide.

Contento

He comprado el de 127 y pesa una barbaridad, gira súper bien y va perfecto.

Morsa a sfera

Prodotto eccezionale! La morsa è molto pesante e stabile. Ottimo rapporto qualità prezzo, consiglio l'acquisto.

Funkar bra

Bra. Hade varit roligt att få med alla tillbehören men men..

Artigiano

Buon rapporto qualità prezzo, attrezzo solido e ben costruito.

Excelente herramienta

Gran calidad por el precio, poco juego entre las mordazas, buena rotación, simplemente una gran herramienta

Étau bijoutier

Bonne manufacture, mis or mis les jeux au niveau des mords de l'étau, la solution est de confectionner des cales soit en laiton, en alu comme bon vous semble pour obtenir de la stabilité lors des travaux de gravure, polissage... J'ai également réalisé des cales pour chaque trou afin de bien maintenir les accesoire livré avec. Bien a vous.

Very pleased

Lovely little vise and very happy with purchase. Makes setting stones a lot easier, definately recommend.

Ball Vise

Pour le moment j'en suis très satisfaite surtout pour le prix et tout ce qu'on peut faire avec ! Petit bémol : certains accessoires ne sont pas bien calibrés aux différents trous donc ils ne rentrent pas.

Very good

I love this ball vise, have a bigger one from the brand too, good and sturdy! I use it for stone setting 💫

mrs

Great quality vise - easy to use and has made a huge positive difference to my stone setting and work holding

Better than expected

Great starter ball vise better than i expected everything works smoothly and love all the extra parts makes it more versatile and the finish is nice aswell one recomodaion tho is it would be a good idea to get a rubber base for it ... it comes with 2 plastic ones and makes it a little to slippery

Perfekt für Goldschmiedearbeiten

Gut verarbeitet und robust mit viel Zubehör. Perfekt für Fasserarbeiten, aber auch zum Gravieren.

customer

Everything matches the description. fast delivery!

Designer

Handy tool, good price fixtures are nice especially the ring fixture, good price, only slight glass is the cinching ring doesn't seat easily, don't know whether it's the plastic material or loose tolerenceof the 2 metal portions. Other than that great value!!

Se me rompió al poco tiempo de usarlo

Si no se me hubiera despegado el cuero y roto una patita de él sujeta sortijas, hubiera sido un buen producto. Pero se me ha roto demasiado rápido. Ojalá me lo puedan reemplazar.

Preis Leistung top Zubehör 50/50

Ich finde der Schraubstock ist sehr schwer und Stabil. Das Zubehör ist ein wenig wackelig. Aber auch ohne Zubehör 5/5

Tornillo de bola

Llegó todo perfecto,fueron rápidos en el servicio y reparto,la herramienta tal cual a lo descrito,se ve de muy buena calidad,será de gran ayuda en mi labor.

mag. ing.

die zusatzteie sind nicht passgenau, bohrungen zu gross, zapfen zu klein muss modifiziert werden. leider. nicht zu empfehlen

Ms

I am still waiting for delivery of this item. It was ordered on October 21, 2025.

Arrivé rouillé

Bonjour je viens de recevoir mon colis malheureusement mon boulet de graveur est complètement rouillé inutilisable j'espère en recevoir un autre en bon état bientôt.

Ball vice

Another the brand's product thats a great value. Not quite the quality of a Steve Lindsey or even a grs ball vice but for a 10th of the price you cant go wrong. Again Another tool that just works and dose as intended

On a budget!!

I LOVE the brand! In general! They have everything you could imagine at such affordable prices and great quality!

Well made

its a great product. Love all the attachments!!

Blocco incisione

Ottimo prodotto, maneggevole e facile da usare. Ottima la spedizione e l' imballaggio

Mr

Top, léger jeux dans les piège qui se clipe dans l'étaux

Excellent item

Perfect piece of equipment for the jewellery workshop. So much cheaper than other brands. I can’t find fault with it.

Excellent value for money

The vice is really good, it's well made and the rotation is very smooth. Excellent value for money

Graver_Beginner

Verry pleasently suprised with the sturdines! And the overeall quality is verry good! The weight is high enough to hold the vice at the table if it's not to smooth. I fashioned a workplace with a plywood table and that is enough of a course table top to hold the vice in place. Would highly reccomend!

Mr

Nice and solid with weight in the base all good thankyou

Improved, almost there!

This version of the ball vise (with the plastic handle) fixes many of the earlier complaints. The pins on the top plates (see photo) screw in so it can be a fixed position or swivel like the older model. The top attachments with the small pins fit nice and snug. The problem is that the larger pins are a bit too slim. When clamped, the top plate forms a V. When using the plate clamp to hold a coin, the walls are not vertical enough to keep a tight grip. There are some small cosmetic issues that I normally wouldn't mention. For example, the parts holder is great. Except the two wings don't fit any parts. There is no place for the handle or ring mandrels. Does not affect use, but poor attention to detail.

Master Jeweler

Great product. Extremely pleased with the quality. Definitely recommend.

It works.

Has a bit of wobble but didn’t cost me an organ.

Ball Vice

This is great value & quality for the price, will suit any level of experience as a craft person, highly recommend, delivery was spot on & packaging intact, very happy.

Adorei!

Funciona perfeitamente e é otimo para cravar

Happy User

Item recieved in good order despite poor packaging. I have yet to find a shape or working angle that cannot be managed with this exelent ball vice.