Ruční zakružovačka a ohýbačka plechu 343mm My Essenza

Väl värd sina pengar

Funkar mycket bra efter lite finslipande av käftarnas glidytor och infettning. Beställde en till, så har jag en för krymp och en för sträck och reservkäftar

Buono, utile, non professionale

La utilizzo per creare anelli/cerchi con piattine in ferro (acciaio carbonio) di 3/5cm per 3mm di spessore. Con tante passate e un po’ di pratica è un ottimo aiuto. Solida e ben strutturata, per lavoro poco gravoso e saltuario. Non può essere “precisa” per natura quindi le misure del cerchio vanno raggiunte con calcoli e astuzie. A differenza delle “autocostruite” presenta vantaggi con un costo di poco superiore al materiale necessario per costruirsela: movimento manovella/ghiera di traino a ingranaggi dentati; cuscinetti di traino e supporto ingrassati; regolazione con pratica manovella senza chiavi. È suggeribile ingrassare ingranaggi e cuscinetti con pistola (non in dotazione). I cuscinetti hanno zigrinatura che facilita il traino ma lascia piccoli segni sul metallo. Difetti migliorabili: manovella bloccata da un solo grano a brugola 6mm, manca un adattatore per ingrassare cuscinetti frontali.

Good little tool

This works well in 1.0 and 1.2 mm steel That is its limit. Good quality fir inexpensive tool.

Works as advertised

For the small jobs I need it for it works just fine, It does need to be mounted to a solid base, I bolted it through the top of my metal table. If I was using it all the time having two would be nice to avoid switching the jaws between operations but they are easy to change with no tools required.

Defekt

Seade töötab poolikult. Üks huultest ei tee mitte midagi. See oli kättesaamisel katki. Tõenäoliselt on see defektne. Oleksin tänulik, kui nad saaksid selle välja vahetada. Imemishuul töötab, aga imemiskomplekt on defektne ja ei tööta. Palun aidake mind ja vahetage see välja, sest mul on seadet vaja.

Mekaniker

Alt er som forventet, hurtigt fremme, brugte den til en bil,har også været lånt ud, nem at bruge,

Shrinker/stretcher

This tool didn't function as delivered. I had to search to find a way to correct it in order to use it. Once that was done, it works satisfactorily, but could be better.

Mekaniker

Very nice and handy tool. I had it for the last 1 month and use it several times and it will keep working.

gutes werkzeug

sehr stabile ausführung, für den hobby gebrauch geeignet

travail réalisé en phase avec données indiquées dans texte de présentation.

cintreuse à fer plat ou tuyaux petits diamètre

Shrinker/strecher Dont buy

The product is really bad and does not work. I cannot recommend this product to anyone because it does not do anything it is supposed to. I submitted feedback about the issue, and in the response I was asked to do something that is not even possible with the device. Apparently an AI assistant is responding to their feedback.

Universal Juvenile

Nice tool. It works well enough for the simple task I bought it for. I have future plans that will test it further and if it holds up I will order a second one so that I don’t have to switch the jaws back and forth.

Parfait pour cintrer la tôle

Comme les autres commentaires, rien à redire : ça fait le job pour un bricoleur amateur. Je m’en sers pour restaurer mon ancienne. Je l’ai installé sur un support de machine universel afin de créer un petit atelier transportable dédié à la carrosserie.

Herr

IA Gerät in Preis und Leistung. Zum Karoserieblech strecken oder stauchen sehr gut geeignet.

Review.

Shrinker is good value for money dosnt shrink steel nearly as quickly or cleanly as a very high end unit but for value for money a great tool and works

Do małych projektów

Bardzo przydatna, dobra jakość wykonania.

Mr

I bought these because I wanted to make some panels for an old vehicle and needing to stretch and shrink some parts to get the shape.. They are very easy to use, just clamp it in a vice and off you go. Worked perfectly first go. I'm going to build a stand with a foot peddle on next for them as.im moving and won't have the same heavy bench that my vice was attacked to. Also a foot peddle will make life.a.lot easier. They probably do one on here now mind as it was a year ago I got mine. Ther still working great mind.

Machine pour tole

Utilisé pour refaire des petite pièces en tôle pour la rénovation d'une ancien voiture, la machine fait très bien le job pour un amateur et un usage occasionnel. J'ai fabriqué un support pour pouvoir mieux la fixer dans un étau, sinon ça fait le job.

Great for small diameter hoop making

Works great, I use it to create hoops for my wife's crocheted mandalas using 3/16" steel rod. That's all I ever intend to do with it, so I shortened the handle, which was bordering on ridiculous in length. It work smooth. It's not a particularly precision device, but it does the job.

quality

very rigid and good quality, easy to use

Owner

Good roller. Heavy duty and good quality. I would recommend.

Mr

Good product for price. Great tool for folks who only need one occasion.

Hobbyreparatør

Vær obs på at det tilkommer 25% norsk MVA og et tollbehandlingsgebyr på NKr 165,- som må betales ved mottak av varen(e) i Norge.

sir

great product great service very quick shipping

Mr

Heavy bit of kit but simply does not work, the sliding surfaces on the jaws are far too rough and clearly have never been fished off. However I gad a look on YouTube Tube and you can sand these with a lot of effort to get them to slide. A lot of effort though. If you can afford it but a branded quality set

Sehr Gut

Sehr gutes Gerät zum billigen Preis. Natürlich gibt es da kleinere Mängel, wie z.B. Sauberkeit etc... Es empfiehlt sich bei billigen Geräten aus Fernost immer ein Zerlegen, Reinigen und Schmieren. Eigentlich sollte das ja logisch sein, da die gleichen Geräte in sehr unterschiedlichen Preisen angeboten werden - und irgendwo muss ja der Unterschied sein. Es gibt auch andere Versionen, aber verchromte Teile sehen zwar gut aus, zählen sollte allerdings die Funktion. Und diese ist sehr gut - nach der Vorbehandlung. Wer dies nicht will oder kann ist bei teuren Anbietern wohl besser aufgehoben, oder sollte von handwerklichen Tätigkeiten besser absehen. Ich für meinen Teil bin sehr zufrieden damit und kann es empfehlen.

Owner

Product looks great and can't wait to use it. Delivery was very quick and price was great. Very pleased with this product. Wanted one but was discouraged by the prices until I found this. Ordered on a Monday and received on a Wednesday. Can't believe how quick it was to deliver. Very pleased.

ady

Very strong unit that can do work well beyond its working limits The unit just looks like its been hex bolted together but there are two hydraulically pressed 25mm tubes holding the main plates together and a cog shaft runs in each one. The cogs are chunky Mod3 13 tooth jobs. Everything is hardened and you can even do stainless tube with it Only gripe is there are no sets of rollers you can buy to make a very meaty small unit more versatile

In Ordnung

Absolut in Ordnung! Ich verstehe in keinster Weise die negativen Kritiken! Für den Preis in Ordnung. Biegeergebinsse lassen sich sehen!

Great tool for the price

Great tool for the price. Makes rings from 4x30mm steel

Mr

Works well for the jobs I need it to do on my hobby car. As it is my first Shrinker / Stretcher it was nice to see that it was fairly easy to use.

Fantastisk maskine

Dækkede mit behov Fin maskine til pengene Dejligt med et produkt som virker Mine bedste anbefalinger herfra

Utilisation pour fabrication pièces carrosserie

Utilisation pour fabrication pièces carrosserie, parfait pour petite pièces rapport qualite prix très correcte

Mr

I haven't used the item yet, but I am looking forward to trying it out..............................

OWNER

It seems that I will never learn that I shouldn't order anything from you, again ! I, once again, took a chance that it would be delivered in good condition and I was wrong ! What I receive, seems okay, but no handle and no stretcher enclosed in the package ! Probably because the carton was damaged on the allowing those two items to go missing? Thanks The product does look good.

Works great.

shrinks sheet metal effortlessly. very surprised how well it works. one person can easily operate it.

Solo me hace falta más matematicas

Excelente maquina. Ya compre otra para regalar. Fácil de operar. Solo me falla mis cálculos matemáticos . La calidad del material de primera. Me gustaría ver si venden más accesorios,otros rodamientos más largos para soleras más anchas

Mr

I needed to roll 10mm round bar. After modification, it worked well. The handle length was adequate for what I needed to do. Two grease nipples failed, but I was applying a lot of pressure

Biegevorrichtung

einfaches, kleines Biegegeraet. Sicher, es gibt bessere, aber nicht in dieser Preisklasse. Biegt 30x4 anstandslos....also, man kann nicht meckern.

Morris

Very strong piece of equipment that so far has rolled all the metal I have tried to use. The only issue is the cross hatching on the top roller has already worn smooth...still seems to grip but concern that the upper roller may need replacing soon. Apart from that small issue it works great

¡Excelente!

De lo mejor que puedes comprar para hacerte de herramienta útil y económica, una roladora que te sacará de muchos apuros cuando son cosas pequeñas

EXCELENTE!!

Muy buen producto, es robusto y resistente, cumplió con mis expectativas. Lo recomiendo al 100 % Seguire comprando por aquí.

mr

For the price, better than expected. To use, need more force than expected. To make it easier to work with I made a stand of my own out of square tube.

Fabulous

A really robust and well made roller. Amazing value for money. Highly recommended. If you need a roller then this one won't leave you with any regrets. Fast delivery too.

owner

A great tool, well made to make controled radias bends. Very pleased with the quality... I am presently using it to make potted plant stands.

shrinker stretcher

i've tried the shrinker jaws only. easy to use a straight scrap was pretty quickly stretched and curved these were my first try with this type of tool the price got me and the quality surprised me

welding shed YT

I was going to make one to help with my welding projects, I think its great value for the money..i will be putting it through its paces on YT soon. https://www.youtube.com/channel/UCpnFcA880DMdLcYYyrMrdkw

Rollenbuiger

Ziet er goed uit! Doet wat hij moet doen voor hobby. Alleen rollen laten kleine krassen na, dus schuren nadien is een must. Gevraagd naar een tip om deze krassen te voorkomen. Zeer snel antwoord gekregen waar niemand iets van verstaat. (Ver)taal probleem: Nederlandse taal. "Het enige probleem is om van deze stick een nylon stick te maken, dat wil zeggen een nylon stick, zodat er minder krassen ontstaan." Maar al bij al goed toestel.

Impressive & Durable

Bought this more out of curiosity since I never rolled metal before. I found this roller easy to operate and was successful in making my first 8 inch ring collar for a vent flange. Since then I probably made at least a hundred rings in various circumference with no issues. The roller is well made and very durable. I like to push the limits with tools and even though the listed capacity is 1/4" Round Steel & 1"x3/16" Flat Steel I have easily rolled 3/8" rebar and 1/4" flat.

Gebruikt en getest.

Rolt prima,voel sterk aan. Begint bij rondstaal af te buigen ,maar is tijdens het rollen te corrigeren,bij strip minder last van.. Verder zal de toekomst het leren of de roller zijn nut zal bewijzen,maar heb hier wel vertrouwen in.. Ga hem voor het gebruik wel eerst smeren via de vetnippels. Jammer dat ik geen volledige foto kon toevoegen ivm met het bestandsformaat.

Metal bender

Great but need to be able to make smaller bends

Cintreuse

Fait très bien le boulot pour étirer et retreindre de la tôle acier jusqu'a 1,5mm. Parfait pour des projets de carrosseries ou métallerie amateur.

Machine à restreindre et étirer la tôle

Comme d'habitude avec la marque le rapport qualité/prix est au rendez-vous. Concernant la livraison, rien à dire non plus. Tout est ok..... Merci.

Giętarka kątowa producent, giętarka kątowa aluminiowa 1.5mm, giętarka kątowa do blachy stalowej 1.2mm, giętarka ręczna 65 x…

Jest ok super tani produkt i w miarę dobry Myślę że te chińskie narzędzia są teraz lepsze jak chodzi o jakość Polecam