Cilindro hidráulico 30T, êmbolo 50mm

President

Tool worked great. Order was processed and shipped within 24 hours. Everything was packaged well and arrived quickly

Needed something to pull bushings in

Had to put new bushings in a 160g john deere excavator. This thing did the job. The i.d. of the hollow part of the cylinder is 1.25 inches. Also the part that raises or presses outward screws out so you can attach other things to it. Threads are very sharp so be careful

Carlsson

Only one star on "easy to use" because it is said to be 66 mm inside. Perfect for me as I was about to pull out a 50 mm axle on an excavator. But it isn´t 66 mm inside. It is only 35 mm in the ends and 33,5-34 mm between the ends, meaning that I had to use longer pulling bars and some 50+ mm inside diameter thick wall tubing (pictured) to get the job done. This is costly but the brand refunded me 30% to compensate for this. But what worries me is that hasn´t updated the product specifications even after two weeks. How many more products have the wrong specifications just because doesn´t know how to make a simple measurement? And even worse, how many more products still have the wrong specifications after their customers has filed a complaint? Only four stars on quality because the hydraulic port doesn´t have a ground flat for a Tredo sealing washer. Yes, you can use liquid thread sealant which I did, but a ground flat and a sealing washer is the preferred method. And PTFE tape is absolutely forbidden in hydraulics. The reason for this comment is that the cylinder is supplied with a Chinese hydraulic connection that isn´t used in Europe so you have to change the connection.…

Très bon produit

Très bon rapport qualité prix. Juste un petit manque d'information sur le diamètre du raccordement

P

Je m en sert peu mais lorsque je l utilise il répond a mes attentes Super l arbre creux permet de le faire travailler en traction plutôt qu en compression comme les vérins conventionnels

Saapui ehyenä ja ripeästi perille.

Saapui ehyenä ja ripeästi perille, En ole kokeillut toimiiko. Metsästettävä sopiva liitin, että käy korin oikaisusarjaan. Yllättävän painava murikka. Saapui ehyenä ja ripeästi perille, En ole kokeillut toimiiko. Metsästettävä sopiva liitin, että käy korin oikaisusarjaan. Yllättävän painava murikka.

Hobbymekare

Helt perfekt för att dra ut de gamla cylinderfoderna och trycka i nya på min MF135. Bra slaglängd som bara krävde två slag för att utföra draget/trycket. Köpte den ihop med tryckluftsdriven hydraulpump.

Reikäsylinteri

Hinta laatusuhde täysi kymppi, nopea toimitus, vastasi kuvausta.Käyttöönotto helppo ja nopea voin suositella.

Mr

Perfect product, fast delivery great quality, recommend 100%. Bought It with a foot pump as well, both work perfectly.

Lakhdar

Très bon article rapport prix qualité Shipping rapid Le vendeur professionnel répond aux messages a

A good product

I used it as a bearing extractor and went perfectly smooth.. you can buy the CP-700 pump if you don't want to put money on the hydraulic expensive alternativ..Ps. You should buy the pump separately

Very high quality. Hollow ram so it can pull. Fitting must be changed to what you need.

I used it to press a clutch-brake onto the shaft of a CNC turret press and it worked perfectly. I had to change out the funky hydraulic fittings it came with so I could use it with my pump. I don't know the tonnage I reached but it took quite a lot of force to move this clutch which is a tight fit to shaft. Surprisingly very high quality and as a bonus it has a hollow ram, so it may be used for pulling too. happy customer.

super Teils

schelle Lieferung,gutes Produckt alles O.K. Danke

Good quality, fast shipping, packaged very well!

Product exactly as described. It was packaged really well. The shipping was fast and I used it to press a bushing into the frame of my mini Cooper. It will be an invaluable tool in my garage!

good quality

holds 6500 psi great and threaded adapter allows for other heads to be exchanged for different applications

It_ heavy,but it is a 60 ton ram.

Like the hollow ram for using threaded rod to push and pull pins in equipment.

Works

Works as intended. Only drawback is having to change the quick connect to enerpac.

Satisfied customer

I used the T20 To push in bushings on and excavator it worked perfect I would definitely recommend it. And the next one I buy will be the T 30

Great find

A great ram! I use it to press out old bushings and replace with new ones. Working like a champ.

Too much

This is complete overkill for what I want to use it for. I am replacing the ratchet mechanism on a small cider/grape press with a hydraulic Jack. I needed a holo center pump but 4-10 ton would have been adequate.Will try it out in a few months.

Quality

Used this to press bucket and stick bearings in CAT excavator works well

Good Jack

Would of Gave it 5 star but the quick release adaptor was less than industrial. Once changed we used this jack numerous times with no issues

verin

Tres bonne achat conformr a toutes mes attentes,a renouvel

Great tool.

Exactly what I needed, performed very well. More than I expected. Great tool for a great price. Arrived in a very secure wood box.

good prive

price was great and product has preformed as expected, I am well satisfied.

Good price, good ram

Used the ram to remove and install bushings on a loader frame. Worked well for that job. The coupler that comes with the ram is a odd style, so had to replace with the OTC ones I use on my pump and other rams.

Looks good and is what I expected

Looks good for the price , used for heavy equipment bushing installation

Good value

Jack seems to work fine, can_ beat it for the price as a comparable enerpace would be north of $1000.Fitting is a little cheap.

D_ai raisonnable.

Re?u en bon _at, dans les d_ais pr_us. La connexion rapide n'est pas standard, nous avons du la remplacer.

excellent bang for the buck

I've only used this once under load but it worked great, no leaks so far.

Awesome value

I was pleasantly surprised to see that these arrived with a set of quick disconnect couplings. However they are not the standard size used in the US, so I discarded them. Just got around to using this for the first time it works great. Amazing value.

Great deal

Worked exactly the way it is suppose to.

Cheap and GOOD!

This is a great product. Works just as good as my otc. Time will tell though. I have used it about 10 times and it worked perfectly for pressing bushings and jacking up large trucks.

reikätunkki

Hyvin toimii

Egen företagare

Fungerar perfekt nöjd

Squeeze hard.

Makes the job much easier.

director ejecutivo

Perfecto para lo que quiero hacer.

Ceo

Perfect for what I want to do.

Worth the price

Works well

Lantbrukare

Väldigt prisvärt

Exactly what I need

Perfectly describedHardly recommend it

work great

nice product worked perfect.

Very usefull tool

Affordable, well built

Great ram that does the job

Nothing to dislike

Great

Works as described and shipped quickly

Plenty of pressure

Worked perfectly

Bien

Fonctionne bien et vendeur correcte

C'est du costaud !

Description correcte au verin

Good jack

God jack exactly what I need