Sylinteriputken ulosvetäjä diesel 75-138 mm My Essenza

Shop owner

Works as good as any name brand puller if not better definitely recommend Its worked as intended time and time again thanks

Chief brain surgeon in charge of colonoscopy department

Not fancy but works great. May need to deburr a couple spots but totally worth the price. I'd buy it again without a second thought!

Worked perfectly for tractor rebuild

This tool worked perfectly for pulling the cylinder sleeves on my Massey Ferguson 135. It made my job so easy and the price was amazing.

Great puller

I have used a few liner pullers over them years. This is a great one and it’s easy to use.

Good quality

Very heavy duty. Worked great pulling sleeves on my John Deer tractor

Sleeve puller

The handle bent and one of the pegs started to brake

Shop owner

Nice product, quick shipping,but only downside for me is it won't work for my engine was supposed to according to other people but the plate is to large for the bore and next one down is to small,but that was not s problem other than that seems to be well made I would just make the stand offs into the cross bar because it's a little wobbly until you get pressure on the tool

Worked good

Used on a 10 L cummins motor worked perfectly very heavy duty

Quality

I have used many liner pullars I do many diesel engine overhauls, I was completly blown away with the quality of this product I will be buying more tools from the brand. As with any liner puller a ratchet and socket should be used not an impact and this tool will last for years!

Good tool

I’ve used this puller on two different engine rebuilds so far and it pulled the liners with ease. Had the right size puller plates for both engines. Very happy with this set.

Après utilisation.

Bon produit mais roulement pour extraction trop fragile.

Inner puller

Does a very good job, could do with beefing up a little

mechanic

worked as expected for a reasonable price

Hr

Voldoet meer dan exact aan de beschrijving.

HERR

Sehr gute Qualität Preis Leistung Spitze Würde ich sofort wieder kaufen. Wurde sehr schnell geliefert

Bought but didn't need

Purchased this before I started to rebuild my 5.9 12 valve Cummins. Could not use an my engine has dry sleeves but keeping it for a couple tractor rebuilds we have coming up.

Extracteur de chemise

Les deux tubes qui se pose sur la culasse sont beaucoup trop fragile, au premier serrage ils finissent par s’écraser comme un bout de plastique. Déçu de mon achat !!!

Universel

Convient pour nombreux véhicules, flexible

Uniwersalny

Pasuje do wielu typów pojazdów, elastyczny

Zylinderbuchsenauszieher

Leider minderwertige Qualität- bei dem Preis war auch nicht viel zu erwarten.85/90 er Adapterplatte am Rand gebrochen. Gelenkstück am Auszieher bei der zweiten Hülse abgebrochen. Werde das Teil reparieren da dringend benötigt.

Top Werkzeug

Ein sehr zu empfehlendes Werkzeug in, für mich, sehr guter Qualität, zu einem unschlagbaren Preis... Kann ich nur empfehlen...

Farmer

It worked pretty well. Just make sure you put grease on the threads before you start pulling and put some washers underneath the propping tubes because their sharp edges could damage a block.

Einfach und gut

Sehr rasche Lieferung wie angekündigt. Das Werkzeug ist sehr gut beschriftet und die Anleitung mit Zeichnungen ist klar verständlich. Die ausgewählte Platte passte perfekt. Dank des Drucklagers war die sehr fest sitzende Laufbuchse mit etwas Kraft herausgebracht. Die Abstützung am Zylinderkopf mit einfachen Rohren funktionierte. Ein super Werkzeug zum besten Preis.

Cilindervoeringstrekker

Trekker werkt goed en is stevig gebouwd. Er staat in beschrijving wel dat hij voorzien is voor diesel en verbrandingsmotoren met verschillende trekplaten, maar voor mijn motor was er wel geen enkele trekplaat die de juiste maat had, nog niet bijna. Heb zelf een op maat gemaakte trekplaat laten maken voor mijn motor. Dan werkt het prima, 4 cilindervoeringen uit de motorblok op een 20min.

Engineer

Working very well. Valmet 500 liners coming off easily. Tubes need to be stronger

Mr

Well made parts although the tubes are not as instructed, They do not attach to top bar as I instructed in hand book which made it very difficult to use I had to put cylinder head bolt in block to keep tube in position Not very easy to use really disappointed Have I got wrong top bar and tubes? Please advise

Mr

I watched it being used on u tube, took note of the shortcomings highlighted there and bought one. Appart from the nature of the legs, as noted, the biggest problem was we had to grind a 19mm nut on the top of the shaft to stop it spinning when you torque it up. Pulled the liners on the tractor no problem at all.

Great puller for the price

Bought this to use pulling sleeves out of tractor engines, worked much better than I thought it would, only issue I ran into is that the pipe pieces for the stand were very thin and crushed on the first sleeve. Went to TSC and bought some 3/4x3” pipe nipples and they have worked amazingly. I would recommend getting something stronger than what comes in the box. But overall very good puller for the price

Principal

Was not enough puller to pull liners from a JD 404 engines. The handles bent. I got three out with great effort. I sent the block off to the machine shop where they pulled the remainder with an OTC puller. Kinda junk.

Great tool purchase

The pulller worked perfect on pulling the liners out of a 3020 John Deere. Can’t wait to try it again. Great price and great quality.

Un buen útil

El producto es muy bueno , saqué los cilindros del motor sin ningún problema , para el taller es perfecto

International 584

The product is very well made and of high quality. The price is also affordable. A positive surprise. Thank you:)

Herr

Very good. It does what It should without difficulty. Robust construction. Delivery charges included . A very useful tool. Thank you. ..

Riktigt bra

Funkar riktigt bra. Använd några gånger och har inte mycket att klaga på.

Fordonsmekaniker

Hög kvalitet!........................................................................................

Ower

Worked great good tool great price have used the tool two time in the last week easy to used would order again

Inexpensive cylinder puller does the job

Used this on my Allis Chalmers I-40 to remove the cylinder liners. I had to remove some material from the pulling disc with a flappy wheel on my angle grinder to make it fit. Let's face it, if you need this tool to remove cylinder liners every day, than this is not for you. It's very cheaply built, the bearing on top is very low quality, you must grease it and crimp the bearing case to the bearings or they will fall out. Mine stayed together for removal of all 4 liners. The 2 support pipes are made of tin foil, but they work. I will probably only use this tool 1 more time in my life, and it is available for my friends to use, so they do not have to buy it. I gave this tool a good review, because it did what it was supposed to, and it did not break, "yet"! I have a pic of tool in use, but it would not let me load it?

Mr

Great tool works fine.................................................................................

Tractor repair

Great tool. Did what it was made for. I would recommend it .,... ......................,............

Hobbies

Worked well you my have to sand/grind the edges smooth to fit the cylinder walls. The price was right for a one time use.

Mechanical Engineer

Puller works well, with the plates to suit the different size liners the flexible head allows ease of fitting down the liner. The friction bearing to provide assistance with the puller failed as it wasn't heavy duty enough to withstand the forces pulling a very tight liner out.

Good puller

Good puller for the price comes with several different types sizes to accommodate different sleeves. Will work with a 1466 international. Beats building one from scrap.

found store watching Adept Ape on YTube

Solid well built tool, that will never bend or break if used correctly. Tool pays for itself after one use. Product not carried by Hdepot, HFreight nor AMZ. Shipping was free and delivered in 3! days.The brand is my new favorite store to browse for tools. and if you ever need an animal strecher they have that too

Boss

Very well-built product for the price. Worked flawlessly. Had to pull liners on a Yanmar in a John deere and it was a breeze to pull them.

Did the job

Pulled sleeves on a JD 6.8L for an In-frame overhaul.The puller did the job.Best features:-- The toggle for the pulling plate. Made inserting the tool quick and easy. The removal of the sleeve without unthreading the handle was easy-- The handle thrust bearing helped a lot. Watch the bearing balls, they are not locked in very well. Dropped and recovered a couple balls.For < $100, not complaining about the minor stuff.These sleeves pulled pretty easy. If a sleeve is stuck hard, keeping the threaded shaft from rotating requires vise grips on the shaft. (little area at the top to clamp on)Grease the threads and oil the thrust bearing, it helps.

Enkel att använda

Fungerar bra

Same quality as others that are much more expensive

Great tool great price

Mechanic

Worked as it should and is easy to use

Top

Funktioniert super und sehr stabil

chemise

a tres bien fait le job

Owner

These tools are amazing 10/10

Good tool

Working great

Very happy!

Its really a big help to my work,

شكرا جزيلا

شكراً جزيلاً